1. Don't wait for the 12V 200AH gel battery to run out before charging. It should be charged in time after discharging. The battery charger should use a better quality charger as much as possible, which will help improve the service life of the 12V 200AH gel battery.
GECONA SOLAR contains other products and information you need, so please check it out.
2. The 12V 200AH gel battery must be fully charged and stored in a cool and dry place, away from heat sources and direct sunlight. If it is stored for more than one month, it should be recharged before use, and if it is stored for more than three months, it should be deeply charged and discharged once.
3. When charging in hot weather, pay attention to the temperature of the battery not to be too high, and do not overcharge the battery. If it is too hot to touch, you can stop and recharge. The temperature is low in winter, and the battery is likely to be insufficiently charged, and the charging time can be extended appropriately (such as 10%).
4. If it is a set of 12V 200AH gel batteries, when a single battery is found to be faulty, it should be replaced in time, which can prolong the life of the whole set.
1. Do you accept customization?
Yes, customization is accepted.
(1) We can customize the color of the battery case for you. We have produced red- black,yellow-black,white-green and orange-green shells for customers, usually in 2 colors.
(2) You can also customize the logo for you.
(3) The capacity can also be customized for you, normally within 24ah-300ah.
2.Do you have a minimum order quantity?
For more 200Ah Gel Batteryinformation, please contact us. We will provide professional answers.
Normally yes, if you have a freight forwarder in China to handle the transportation for you. One battery can also be sold to you, but the shipping fee will normally be more expensive.
3.What is the role of the TORCHN gel battery exhaust valve?
Exhaust way of gel battery is valve controlled, when the battery internal pressure reaches a certain point, the valve will automatically open, lf you think it's high-tech, it's actually a plastic hat. We call it a hat valve. During the charging process, the battery will produce hydrogen and oxygen, some of the gas will compound in the AGM separator to produce water, and some of the gas will come out of the electrolyte and accumulate in the internal space of the battery, When the gas accumulation reaches a certain pressure, the cap valve will open and the gas will be discharged.
4.What is the average lead time?
Usually 7-10 days. But because we are a factory, we have good control over the production and delivery of orders. If your batteries are packed in containers urgently, we can make special arrangements to expedite production for you. 3-5 days at the fastest.
5.What is the key features and characteristics of gel batteries?
(1). **Low Self-Discharge**: Gel batteries have a lower self-discharge rate compared to traditional flooded lead-acid batteries, which means they can hold their charge for longer periods when not in use.
(2). **Vibration Resistance**: The gel electrolyte immobilizes the electrolyte, making gel batteries more resistant to vibration and shock, which is particularly advantageous in mobile applications such as RVs and boats.
(3). **Safety**: Gel batteries are considered safer than flooded lead-acid batteries because the gel electrolyte immobilizes the acid, reducing the risk of leakage or spillage. This makes them suitable for use in indoor or enclosed spaces.
Want more information on Solar Street Light Manufacturer? Feel free to contact us.