To distinguish the advantages and disadvantages of the hose crimping machine, we can use one-look, two-listen and three-measure methods to distinguish:
You will get efficient and thoughtful service from HESPER.
1. Look: Observe whether the hydraulic accessories and electrical components selected by the hydraulic hose crimping machine are famous brand products or regular manufacturers; whether the circuit configuration is regular; whether the pipeline design of the oil station is reasonable; whether there is oil leakage at the connection. If you pass the visual inspection above, you can proceed to the next inspection.
2. Listen: Turn on the device after power on, and listen to whether the device is running normally. If there is abnormal noise, it is often because the coaxiality of the motor and the oil pump is not up to the standard. The other reason may be caused by the unreasonable selection of the displacement and pipe diameter of the oil pump. Not very well caused.
3. Measurement: Finally, the main parameters of the equipment are measured
If you are looking for more details, kindly visit hose skiving machine.
3.1 Leave the device in the dry running state and touch each mold base block with your hand. There should be no jitter in the hand, otherwise it will be regarded as unqualified product.
3.2 Install the device on the mold, withhold a sample joint, and measure the withholding joint with a caliper or micrometer. The roundness and taper should be within 0.1mm, which is considered good.
3.3 The hardness of the mold base and the mold hardness are also the key to the normal use of the equipment in the future. Customers can ask the manufacturer to test the mold base or mold with a desktop or portable hardness tester. When the mold base hardness is lower than Rockwell HRC60 mold hardness is lower than Rockwell HRC50, it will affect the hose crimping quality.
3.4 Finally, inspect the eight-lobe uniform division of the mold base of the equipment and the flatness of the mold. Good equipment will specifically control and adjust these two items, while some low-quality equipment does not control the above two parameters.
For more information, please visit Chinese food grade hose supplier.