Steel structure building is a kind of building that used the steel skeleton, and profile sheet or glass wool sandwich panel as the enclosure system, now it is one of the major building types. Please check more at steel structure buildings manufactured by China PEB.
For more information, please visit our website.
Steel warehouse, steel workshop, steel conference room, steel high-rise, steel hangar, steel shed, steel barn, container house, steel prefab house, container prefab house, etc, any building you could build with steel structure, it is more cheap, saving more construction period.
Advantages:
The material has high strength and high elastic modulus. Compared with concrete and wood, the ratio of density and yield strength is relatively low, so under the same stress conditions, the steel structural components have a smaller cross-section, lightweight, easy to transport and installation, suitable for the large span, big height, significant bearing.
2.Good toughness, good plasticity, uniform material, high structural reliability
Suitable for bearing impact and dynamic load, with good anti-seismic performance. The internal structure of the steel is uniform and is similar to the isotropic homogeneous body. The actual working performance of steel structure is more consistent with the calculation theory. So the steel structure is highly reliable.
3.Steel construction installation of a high degree of mechanization, high construction speed
The steel structure is easy to manufacture in the factory (or workshop), assemble at the site. Factory mechanized steel structure components of high precision, high production efficiency, site assembly fast, short construction period. The steel structure is the best industrialization structure.
4.Low carbon emission, energy saving, green, reusable
The demolition of steel structure building won&#;t produce waste, steel can be recycled.
Disadvantages:
When the temperature below 150 &#;, the steel properties changes very small. So the steel structure can be used for the hot manufacturing workshop, like steel mill production workshop. But when the temperature of steel structure components surface is higher than 150 &#; heated by the heat radiation, the steel parts need to be isolated with insulation board, such as insulation wool, anti-fire painting, etc. When the temperature is up to 300 &#; -400 &#;, the strength and elastic modulus of steel will significantly decrease. When the temperature is about 600&#;, the strength of steel tends to zero. Buildings which have special anti-fire requirements, the steel structure components(or called steel members) must be protected with anti-fire materials, like concrete, to form the structure of concrete and steel.
Especially in a wet and corrosive environment, steel is easily rust. Generally, steel parts need to use anti-rust painting or galvanized surface, and also need to be maintained regularly. For the offshore platform in the seawater, it needs to use &#;zinc anode protection&#; and other measures to anti-corrosion.
What is a new type of steel structure workshop? What are the advantages of the new steel structure workshop? The new steel structure factory building refers to the modern factory building constructed with new environmentally friendly materials. Generally refers to a factory building with a steel frame.
The characteristics of the steel structure workshop are as follows:
1. The steel structure is light in weight, high in strength and large in span.
2. The construction period of steel structure buildings is short, which reduces investment costs accordingly.
3. The steel structure has high fire resistance and strong corrosion resistance.
4. The steel structure building is easy to move, and the recycling is pollution-free.
TIANYING supply professional and honest service.
Shock resistance
The roofs of low-rise villas are mostly sloping roofs, so the roof structure basically uses a triangular roof truss system made of cold-formed steel components. The light steel components form a very strong structure after sealing the structural plates and gypsum boards.&#; &#;Slab-rib structure system&#;, this kind of structure system has stronger seismic resistance and resistance to horizontal load, and is suitable for areas with seismic intensity of 8 degrees or more.
Sound insulation
The sound insulation effect is an important indicator to evaluate the residence. The windows installed in the light steel system are all made of hollow glass, which has good sound insulation effect, and the sound insulation can reach more than 40 decibels; the wall composed of polyurethane sandwich board insulation material can have a sound insulation effect of up to 80 decibels .
Wind resistance
The profiled steel structure building has light weight, high strength, good overall rigidity and strong deformability. The weight of the building is only one-fifth of the brick-concrete structure, and it can withstand a hurricane of 70 meters per second, so that life and property can be effectively protected.
Heat preservation
The thermal insulation materials used are mainly polyurethane sandwich panels, which have good thermal insulation effects. The use of thermal insulation boards on the outer wall effectively avoids the &#;cold bridge&#; phenomenon of the wall and achieves a better thermal insulation effect. The thermal resistance of a polyurethane sandwich panel with a thickness of about 50mm can be equivalent to that of a brick wall with a thickness of 1m. Foshan Tianpuan Building Material Technology Co., Ltd. 1
Durability
The light steel structure residential structure is all composed of cold-formed thin-walled steel component system. The steel frame is made of super anti-corrosion high-strength cold-rolled galvanized sheet, which effectively avoids the influence of steel plate corrosion during construction and use, and increases the service life of light steel components. The structure life can reach 100 years.
Health
Dry construction reduces environmental pollution caused by waste. The steel structure of the house can be 100% recycled, and most of the other supporting materials can also be recycled, which is in line with current environmental protection awareness; all materials are green building materials that meet the requirements of the ecological environment and are beneficial to health .
Comfort
The light steel wall adopts a high-efficiency and energy-saving system with a breathing function that can adjust the dry humidity of the indoor air; the roof has a ventilation function, which can form a flowing air space above the house to ensure the ventilation and heat dissipation requirements inside the roof.
Quick installation
All dry work construction, not affected by the environmental season. For a building of about 300 square meters, only 5 workers and 20 working days can complete the whole process from foundation to decoration.
energy saving
The material can be recycled 100%, truly green and pollution-free. All use high-efficiency and energy-saving (polyurethane sandwich panels) walls, which have good heat preservation, heat insulation and sound insulation effects, and can reach the energy-saving standard of 60%.
Contact us to discuss your requirements of Steel Structure Workshop. Our experienced sales team can help you identify the options that best suit your needs.