The Complete Guide To Palisade Fencing - Barkers

09 Dec.,2024

 

The Complete Guide To Palisade Fencing - Barkers

The Complete Guide To Palisade Fencing

Palisade security fencing, however, is one of the most commonly used fencing systems across the world. Depending on your requirements, there are a range of options available when is comes to palisade fencing. The security provided can range from standard boundary demarcation to defending against attackers using powered tooling and petrol grinders for a set amount of time.

If you are looking for more details, kindly visit Boya.

The palisade design has been around for over 100 years. Standard palisade can be breached pretty rapidly depending on the intruder&#;s experience and access to specific tools. That&#;s why Barkers&#; designed their highly accredited, high-security palisade fencing systems, offering unmatched levels of security and deterrence.

In this guide we will cover:

  • Palisade &#; What is it?
  • The Benefits Of Palisade Fencing
  • The Cons of Palisade Fencing
  • Palisade Fencing Toppings
  • Palisade Accreditations
  • Palisade Installation
  • Conclusion

 

Palisade &#; What is it?

Palisade security fencing is made of steel pales which are attached to horizontal rails, connected to sturdy vertical joists or &#;posts&#;. Due to being versatile and sturdy, it addresses a wide range of perimeter security needs and has seen immense popularity because of this.

The constructed steel fence creates a solid barrier to entry, or boundary, which is perfect for large industrial areas and public spaces alike.

Most commonly, steel palisade fencing can be built in heights ranging up to 3.6 metres in a single pale.

 

 

The Benefits Of Palisade Fencing

Palisade fencing is so widely used because of the wide array of benefits it offers to those who use it. Steel palisade can be found all over the world in areas like schools, airports, railways and datacentres  to name just a few, as well as a whole variety of industrial sites.

Let&#;s break down some of the most unique benefits palisade fencing offers:

 

Security

Palisade fencing has been so popular for its ability to secure property and land, that even the ancient Greeks and Romans were seen to construct it around their camps and fortresses. Palisade has come a long way though, as the wooden fencing employed by those ancient empires has been upgraded to galvanised steel.

This treated steel accompanied with the palisade design is why palisade fencing is the go-to solution for securing perimeters.

Palisade fencing comes in a range of security levels. Standard palisade has received some criticism in recent years because the fastener on standard systems can be breached fairly quickly with a hammer. Whether this is a problem for you depends on whether your threat is carrying tools and what tools they may be.

If you&#;re looking for standard palisade, it&#;s best to buy a high quality product, one that has been manufactured to meet British Standard or higher. Palisade that falls below British Standard may be pushed over or the rails may sag over time because they are not strong enough to take the weight of the pales.

However, in the last couple of decades palisade fencing has been engineered to mitigate emerging threats. Therefore, the level of security provided has improved. Later in this blog we&#;ll take you through the different levels of security available.

 

Adaptability & Durability

Palisade can naturally adapt to contours in the ground during installation. For example, Barkers high-security palisade can cope with up to 33 degrees of sloping ground without cutting down bays or making modifications such as constructing steps.

A key benefit to palisade fencing is its durability. Made from premium mild steel, palisade fencing is hot-dip galvanized to give it an expected average life span of more than 25 years.

The protective zinc coating that Barkers use on their fencing protects the steel from corrosion and can be enhanced by polyester powder coating to achieve any RAL colour finish.

 

Anti-Climb

Palisade fencing is made using strong steel pales which have often been reinforced, that along with pointed tops, deters attempts to break in as attackers can see the difficulty of entry.

Palisade fencing is designed to look intimidating with sharp edges and points to deter climbing.

To make a fence difficult to climb your palisade security fence should be high with no footholds. As mentioned earlier palisade fencing can be 3.6metres high in a single pale. And as you go to high security variants of palisade fencing the pales become closer together creating smaller spaces, way to small to gain a foothold.

To make palisade fencing even harder to climb, you could add an additional topping such as Y or T extensions with barbed or razor wire. Instead of additional toppings, Barkers can curve the pales of the palisade fencing outwards. This makes the fence even more intimidating and is perceived as being even harder to climb.

 

The Cons of Palisade Fencing

Whilst these are not necessarily cons in palisade fencing design, they are considerations to keep in mind when specifying the type of fence on your site.

 

Aesthetic

Although palisade fencing is renowned for its ability to look intimidating for possible intruders, this benefit could also be seen as its biggest downfall. Generic palisade fencing can look unappealing, especially in or around residential areas, causing concern.

However, as the below image demonstrates, palisade fencing doesn&#;t have to look out of place and when done right can fit into its surroundings.

 

Cost

Due to the extra solid steel in the palings, palisade fencing is more expensive than standard mesh fencing systems used for boundary demarcation.

Whilst the initial cost will be higher for palisade, it&#;s worth mentioning that repairs are fairly cheap to carry out, as the separate pales can be replaced individually.

 

Fixings

Within standard palisade fencing, the pale fixing is the biggest weakness of the system and can be easily removed if an intruder has the knowledge to do so.

This problem is then compounded as those pales (which have been breached) can be placed back into position, making the security threat harder to detect.

As a direct response to this, Barkers developed high-security derivatives, which use special high load fixings and fasteners capable of withstanding both hand and power tools.

Palisade Fencing Toppings

Adding a security topping further deters people from climbing over the fence and can be added during the specification process.

Palisade fencing systems can have several security toppings variants added to them. However, the most commonly seen toppings are:

  • Barbed wire
  • Razor wire

As shown below these can be added onto Y or T extensions within the fencing:

Are you interested in learning more about Steel Palisade Fencing for Sale? Contact us today to secure an expert consultation!

 

Palisade Security Fencing Features

Barkers&#; high-security palisade system is:

  • PAS68 Certified (StronGuard RCS) and as such, is the only palisade fence to do so.
  • LPS SR3 approved
  • ASTM M10-A5
  • NPSA &#; Contact NPSA for more information

Optional Palisade Fencing Features: Barkers offer pales that curve outwards on their palisade fencing as an extra deterrent against climbing.

 

Palisade Accreditations

As discussed previously in our blogs, British Standards for palisade security systems are hugely important. For maximum security, there are several accreditations that you should look out for to ensure your palisade fencing will perform as intended. Below are three of the most affluential forced entry accreditations to consider, when specifying your palisade fencing.

 

LPCB (Loss Prevention Certification Board)

LPCB has been working with industry and insurers for more than 100 years to set the standards needed to ensure that fire and security products and services perform effectively.

In recent years LPCB&#; has gained momentum for being all-encompassing and universal. It is being adopted by schools, healthcare facilities, the water industry and data centres to name a few.

 

NPSA (National Protective Security Authority)

NPSA is the government authority for protective security advice to the UK national infrastructure &#; Products with this accreditation have been tested and approved for use on government infrastructure.

 

ASTM (American Society for Testing and Materials)

ASTM is an international standards organization that develops and publishes voluntary consensus technical standards. This is widely used in the US and the Middle East.

 

Palisade Installation

Possibly the biggest difference between mesh and palisade is the installation. Typically mesh systems have 10% shorter post centres, which in turn means more holes to be dug and more concrete to be poured.

Although palisade typically has fewer holes to be dug, it comes in smaller pieces and does require the rails to be inserted into the posts and the pales being fixed to the rails.

 

Ground Conditions

Mesh fencing has large, rigid panels. If the ground is uneven or there is any kind of sloping ground, the fence will have to be buried or stepped, requiring additional labour and posts to stop gaps appearing under the fence.

With security variants of mesh, they usually have to be buried in the ground to stop the bottom of the panel from being prised up. A small number of mesh systems such as SecureGuard SL2X don&#;t have to be buried as long as they are completely flush to the floor with no gaps beneath to create a solid stance.

Barkers&#; StronGuard palisade can cope with slopes of up to 33 degrees without the contractor needing to cut anything down or buy and install extra posts. This creates a more convenient solution and easier installation when dealing with uneven ground.

 

Handling

Whereas mesh is delivered as large panels, palisade fencing is delivered piece small, making it easier to handle around the site and take to areas with poor access.

Security variants of mesh have additional strengthening features such as double skins or anti-cut bars which all add weight to the panel. SecureGuard SL2X is one of the lightest panels to have achieved LPS B3 accreditation, but a single 2.4m high panel weighs 92kg and a 3.0m high panel weighs 118kg. The weight and size may make manoeuvring difficult.

Conclusion

Palisade is widely used all over the world, and hopefully, it&#;s clear now to see why. From its intimidating appearance to its impressive security credentials, palisade is a go-to for deterrent and high-security fencing.

Alongside its standard security features, there are also some optional features you can add to further add to the security level of your fencing.

With Barkers Fencing, you gain access to over forty years of expertise in the design, manufacture and delivery of high-security fencing, developed to meet the most stringent national and international standards.

To find out more about palisade fencing for your site, get in touch today.

Or simply call to speak to an expert today.

CLICK HERE TO BOOK YOUR FREE CONSULTATION

SHARE:

Expanded metal versus Palisade fencing - News

Expanded metal versus Palisade fencing

Paul Green, security specialist at The Expanded Metal Company, examines the differences between palisade fencing and expanded metal mesh fencing.

Look at any site with perimeter protection or pay attention to the fencing that is preventing access to train tracks, and you&#;ll often see either expanded metal mesh or palisade fencing being employed. Both types of security fencing have their advantages &#; but why should you choose one over the other?

The use of palisades &#; originally wooden stakes driven into the ground side by side to form a barrier &#; can be traced back to ancient Greece and Rome, where they were used to protect military camps. Wooden palisades were also used by Native American societies.

Metal palisade fencing is today used across multiple sectors as a low-cost perimeter security solution. It is very easy to transport over rough terrain and is simple to install over sloping terrain, so as well as urban applications, palisade fencing is often employed in rural or more remote areas.

However, there are several disadvantages to palisade from a security perspective.

  • Palisade pales can easily be removed through attacking its two fixing points with common items such as a screwdriver or chisel.
  • Palisade pales can also be levered by using common car jacks.
  • Damaged palisade pales can be left in situ by would be criminals who can continue to use it as a point of easy access without it ever being noticed and remedial action being undertaken.
  • Palisade fencing can require intensive and costly maintenance due to ease of attack.
  • By design, the pales can inhibit visibility of CCTV and other surveillance measures.
  • The gaps in palisade fencing are still large enough to allow the ingress of wild animals or for narrow objects to be passed through.
  • Palisade fencing can be easily scaled with the addition of duct tape to create a temporary ladder.
  • Removing just one pale in a palisade fence can allow a body to pass through
  • Palisade often needs to be reinforced with other materials such as expanded metal in order to enhance security performance, which can cancel out the original cost savings.
  • The shape of each pale throws up issues of liability through impalement and misadventure.

Expanded metal mesh is a comparatively more recent security solution. Originally developed in the s by John French Golding, the inventor and patentee of expanded metal and founder of The Expanded Metal Company, expanded metal mesh was originally widely used in the construction industry.

However, its qualities give the material several advantages as a fencing solution &#; and for many years it has been widely used as a fencing solution across the world. Certified, high-end double skinned security fencing such as ExMesh&#; SR3 is used to protect critical infrastructure, government and military sites and high-risk areas, while lower cost options such as ExMesh&#; Fastrack have been designed to be used across miles of railway embankments to protect transport infrastructure and the public.

Expanded metal mesh boasts several qualities which make it highly suitable as a security fencing solution.

  • Expanded metal mesh is formed from one piece of material, meaning there is nothing to work loose, no fretting strands or strained joins or welds. This means that it is tougher to break through than alternative types of fencing.
  • Expanded metal mesh panels cannot be easily targeted at its welds or simply parted with common tools such as scissor jacks.
  • The uncut knuckles of expanded metal mesh withstand force better than welds or joints.
  • The apertures of expanded metal mesh fencing are small compared to the gaps between palisade pales, meaning it is more difficult (or impossible) to pass anything through the fencing.
  • The design and shape of expanded metal mesh allows for greater visibility through the material than that offered by palisade. This has advantages when CCTV is used in conjunction with perimeter fencing.
  • Cutting through expanded metal can generate sharp edges around any breach in the material &#; making it more difficult to pass through.
  • Available in different patterns and finishes, expanded metal can offer a more aesthetically pleasing solution to palisade.

For more information on expanded metal security solutions, visit the ExMesh&#; website.

Check out the video below which shows just how difficult expanded metal mesh fencing is to break through&#;

https://www.youtube.com/watch?v=NUfT1VMshl8

Contact us to discuss your requirements of Steel Fence Supplier. Our experienced sales team can help you identify the options that best suit your needs.