It has been one month since we resume work from New Year holiday. During these days, we are seeing the raw material prices are rising rapidly, not only carbon raw material but also metal materials. Especailly graphite electrode, it even rised USD150 per ton in one week. Investigate the reasons, we think there are the following points:
SINOMETAL contains other products and information you need, so please check it out.
1. In , the price of graphite electrodes was running at a low level, and the sales price was lower than the cost. In order to reduce losses, some production companies began to reduce production in the second half of . As the epidemic situation in various countries has eased, the demand for graphite electrodes has risen, and the current inventory is reduced. However, the production cycle of graphite electrodes takes 6 months, resulting in insufficient inventory.
2. Affected by the epidemic, the market economy has declined, and China has reduced crude oil smelting. As a result, the output of petroleum coke, a by-product of crude oil smelting, was affected, the supply is less than demand, and the price skyrocketed. The production cost of graphite electrodes using petroleum coke as the main raw material has increased significantly.
3. Since last month, to control carbon emissions, China government began to ration the power supply and strictly monitor the carbon emission of production enterprised. Affected by these, industrial enterprises have to partially shut down or reduce production capacity. Therefore, it is very difficult to increase the yield of graphite electrodes in a short time.
Influenced by raw material fluctuation, prices of our most products - semi coke, met coke, electrode paste, graphite electrode, CPC, GPC, anode... are adjusting too, please contact us(, +86 ) freely for latest offer.
Prices have increased rapidly this year
Graphite electrode prices and their input materials have risen sharply this year; needle coke prices have reportedly increased to about $3,200t from $450/t a year. CRU believe that these prices rises are due to supply side factors, rather than being driven by changes to demand from the Chinese steel industry. These changes are affecting the whole supply chain &#; with raw materials suppliers unable to meet demand from electrode manufacturers, and with steel mills around the world concerned that they will run out of replacement electrodes by the end of the year. We hear that there is currently a year long waiting period for electrodes from manufacturers.
A supply side story
A perfect storm of several supply factors have combined to result in sharp price rises. Global supply of graphite electrodes is more concentrated in China than it was pre-, when exports of Chinese billet substantially reduced Asian EAF route steel production, and by consequence also graphite electrode production capacity outside China. This year, there have been several environmental restriction related developments to the graphite electrode sector in China.
Contact us to discuss your requirements of refractory material. Our experienced sales team can help you identify the options that best suit your needs.
We believe that environmental closures now represent nearly 30% of installed capacity and that operating capacity is now concentrated in East and North West China.
Additionally, in the near term, there is also a shortage of needle coke, a form of calcined petroleum coke (CPC), which represents approximately 70% of the input costs of graphite electrode production. This is exacerbating the ability of graphite electrode producers currently operating, to increase production rates to meet demand. A longstanding limiting factor to the increase of graphite electrode production is the supply of needle coke, which is limited to a few refineries around the world with only one independent needle coke production facility in the world (Seadrift, TX &#; owned by Graftech.)
No significant steel sector demand changes
We believe that the demand side influence from the installation of additional EAFs in China is trivial and we do not believe that there has been widespread replacement of IFs by EAFs. Our understanding is that there are only limited circumstances in which mills are permitted to replace IFs with EAFs;
Impacts on the steel industry
Cost increases will primarily be felt by EAF route producers. Data from CRU&#;s steel cost model suggest that the cost impact varied between $3 /t and $8 /t of finished steel in .
Although graphite electrodes are also used in ladle furnaces and will also impact BOF producers, our cost modeling work suggests that the cost of graphite electrodes in was in the region of $1 per ton of finished steel. Therefore we expect there to be negligible impacts on the BOF-route steel producers.
Impacts on the aluminium industry
Growing environmental restrictions was the driver behind increases to anode prices earlier this year. More recently however, the supply shortage of graphite electrodes has begun to affect cathode blocks.
The shortage in the Chinese graphite electrode market has spurred on a rise in Chinese domestic low-sulphur CPC prices. 0.5-0.7%S Chinese domestic CPC prices increased significantly in July, rising by $88-206 /t m/m to trade at $471-691 /t. Prices of the raw material for CPC, green petroleum coke, have also risen due to the spike in demand and this is expected to add upward pressure on Chinese anode and cathode block prices. Therefore the recent price increases to cathode blocks has been a direct response to the graphite electrode shortage. CRU expects that this latest development will exert upward cost pressures to Chinese aluminium smelters
Market implications
Graphite electrodes represent only a small share of input costs for steel producers. However, they are an essential input material with no available substitute, hence the story over the next few months will be one of whether EAF producers can manage to source sufficient electrodes to allow EAF production to continue unaffected rather than a story of slightly higher prices for producers. The winter closures to graphite electrode capacity will be a key determining factor of prices this year and it is an issue we are continuing to track closely.
Graphite electrodes are one of the main end use sectors for needle coke, with another being the graphite anodes of EV batteries. The impacts of higher needle coke prices and graphite electrodes are beginning to affect steel producers now, whereas EV battery producers typically have longer term contracts with suppliers and hence it will take longer for them to be affected by the current price increases.
Demand for graphite electrodes and needle coke is likely to increase in the future; for instance new capacity in China is likely to be EAF based due to environmental restrictions and use of battery technology will become more prevalent. However these fundamental changes to demand will be slow enough that electrode manufacturers will be able to keep pace and it is unlikely that the current price increases will be long lasting.